Renovate your living room

You would like to renovate your living room? You want a change in your living rooms? S-Polytec gives you modern and fresh ideas for your living rooms with a feel-good atmosphere.

Renovating the living room with S-Polytec

Before embarking on a living room renovation, there is one question that immediately comes up. How do you want the living room to look after the renovation?

Since most of the action takes place in the living room, it is a special room and should therefore also be visually special for most people. But how should this specialness be achieved? We would like to show you a great idea for renovating your living room below.

Set accents in the renovation of your living room with the DecoVitas© decor panels. Especially if you like to use high-gloss surfaces, you really can't get around these unique decor panels with self-adhesion. In the following picture, you can see a living room furnished with DecoVitas© according to the motto Black & White.

What are DecoVitas© decorative panels

DecoVitas© are HighTech plastic panels and were specially developed for the decorative sector with a glossy look. DecoVitas© decorative panels are made up of several layers of different plastics and are PVC-free. The most important properties of these sheets are the sinfully glossy surface and the colour brilliance, which is maintained over a very long time. DecoVitas© are UV-resistant and do not fade even when exposed to direct sunlight. For this reason, these decorative panels are perfect for renovating your living room.

How are DecoVitas© applied?

The DecoVitas© decor panels can be glued onto almost any surface. It is important that the substrate is straight and free of grease. The panels are equipped with an adhesive film and can be applied very easily. All you have to do is peel off the protective paper and apply the panels by spreading them from top to bottom. Make sure that there are no large air pockets between the DecoVitas© and the surface to be glued.

Contours, recesses and holes

You can mark any cut-outs on DecoVitas© and cut them out very easily. Because the material is only one millimetre thick, freehand contours, cut-outs or holes can be made quite easily with slightly thicker scissors or a cutter knife. Due to the flexibility of the panels, the substrates do not necessarily have to be straight surfaces only. Round or curved surfaces can also be covered without any problems.

How to renovate living rooms with DecoVitas©

The incorporation of DecoVitas© into the renovation of your living room should be well considered. It does not make sense to cover entire walls with DecoVitas©. You should rather underline special elements and thus show them off to their best advantage.

This way you can design your own luxury living room. We hope we have been able to show you how you can renovate your living room in a very modern and visually appealing way. We would be very pleased to see photos of your renovation projects!

Advantages of DecoVitas© for your living room

• No odour and free from PVC and toxic plasticisers
• Scratch-resistant surfaces thanks to PMMA top layer
• Very long retention of colour brilliance thanks to UV and weather resistance
• Easy cleaning of the surfaces with standard household cleaners
• High-gloss surfaces with mirror effect in piano gloss look
• Very easy to apply thanks to self-adhesive backing

In our online shop, we offer you DecoVitas© decor panels in various colours made to measure.

To our DecoVitas© decor panels

*Source: Survey in Germany on the renovation of rented accommodation by 2017 by statista.com